
Riser Recliners
Hand built, made to measure riser recliners with superb functionality.

Motor Actions
Do you require Single Motor, Dual Motor or Dual Tilt-in-Space?
Accessories for Riser Recliners
A range of optional accessories can be added to the riser recliner chairs to ensure each chair meets the specific needs of the user or environment.
Neck Pillows
Neck Pillows range from a Hollow Fibre Neck Pillow (supplied as standard with firm and soft back chairs) with a zip at the rear to alter the thickness, a soft foam D-Shaped Neck Pillow, the Universal Headrest through to a Contemporary Neck Pillow available in two widths (small 10”/255mm or medium 18”/460mm)all on an adjustable weighted flap.
![]() Contemporary |
![]() Hollow Fibre Neck Pillow |
|
![]() D-Shaped (foam) |
![]() Universal |
Rise Only / Recline Only Actions
Rise Only/Recline Only Actions can be supplied for users for whom the rise or recline function could pose a danger or is simply not required.
Hazard Sensor Device
Hazard Sensor Device consists of a sensor strip around the underside of the chair base which detects an obstacle in its way as the chair is lowered. The chair action automatically stops and lifts slightly away from any obstacle.We strongly recommend a hazard sensor for added safety in areas where there is the potential for children or pets to crawl underneath the chair. Children must be supervised at all times in the proximity of a riser recliner and should never be left unattended by, or allowed to play with, such a chair. The hazard sensor does not cover the scissor action of the legrest.
![]() Hazard Sensor |
![]() Shrouded Mechanisms can be covered with a fabric and wooden upholstered casing combination where there is the potential for children or pets to crawl underneath the chair. |
![]() Rubber Wheels |
|
![]() Polyurethane Castors help prevent the chair moving on a wooden, laminate or vinyl floor however these can make the chair more difficult to move when cleaning (front swivel/rear lockable). |
![]() Non-Slip Glides can be fitted to help prevent the chair moving on a wooden, laminate or vinyl floor however these will make the chair more difficult to move when cleaning. |
![]() Wings can help to protect from draughts and give a traditional look to the chairs. |
![]() Wooden Handgrips can give added confidence when rising or sitting as they are easier to hold than the fully upholstered arms. Reduces arm height by 1”/25mm. |
|
![]() Armcaps are added protection for armrests of the chair. These are a loose fit with the potential to slip during the rising movement. As a safety measure, remove armcaps before operating the seat raise action. Padded armcaps are available on request. |
![]() Drop-in seat in Dartex - Supplied with a removeable Reflexion™ foam cushion as standard, this design allows for a prescribed pressure relieving product to be used as pressure care needs change and has the advantage of minimal contact surfaces between pressure product and sitter thereby providing optimum pressure relief. |
|
![]() Antimacassars provide added protection to prevent staining or marking of the fabric behind the sitter’s head. |
![]() Covered Drop-in seat - Similar to Drop-in seat but maintaining the look of a standard chair, the Covered Drop-in has an additional fabric layer between pressure product and sitter. |
|
![]() Button Protector prevents accidental depression |
![]() 'Squeeze’ Drop Arm Facility is available on all riser recliner chairs with standard seat depth (except Blenheim, Beaulieu and Arlington). |
|
![]() Detachable Legrest Pillow is a removable hollow fibre which is strapped around the upholstery on the lower section of legrest to give additional softness and height to the elevated legrest. |
![]() Handset Controllers Five button handset for dual motor chairs Easy to operate backlit handset featuring activation switch to help prevent accidental operation. Left hand buttons recline backrest and bring it back to upright, right hand buttons operate lift and recline. |